✨ New Arrivals Just Dropped!Explore
Open Box Conductor's Special 2HB Spare Tire Delete® Kit
(Our Open-Box Products may have a few cosmetic defects but otherwise, they're in like-new working condition and still carry a Manufacturer’s Defect Warranty.)
BALLING ON A BUDGET? WE GOT YOU.
Behold the Conductor's Special 2HB Spare Tire Delete Kit - your wallet's new best friend in the world of affordable STD kits. This all-in-one set combines our notoriously loud Shocker XL horns, the STD bracket, and our HornAir 2HB onboard air system, delivering a sound that's larger than life, without shrinking your bank account.
-
The loudest horns we manufacture, be heard for miles!
- Super easy install with the Spare Tire Delete bracket
- Includes all necessary hardware & wiring
- 3-5 second honk time, 65-second recovery
Important Notes:
- VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.
-
Fits most full-size pickups.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- Adding the S6 extensions to your STDK will increase the width from 20" to 29". Please make sure you have the clearance before purchasing.
The video in the link below shows the installation process for our Spare Tire Delete kits!
CLICK HERE FOR SPARE TIRE DELETE INSTALLATION VIDEO
The video in the link below shows our Shocker XL Train Horn in a third-party decibel test alongside your typical "air horn" honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!
CLICK HERE FOR A CUSTOMER VIDEO REVIEW OF THESE HORNS
- Shocker XL train horns
- Spare tire delete bracket
- 2-gallon 6 port air tank
- AC-2 air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft of 5/16" D.O.T. approved air line
- 17ft of 1/2" D.O.T. approved air line
- 6ft of 3/8" air line (for air compressors air intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Black Widow 1/2" NPT stainless steel electric air valve
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
| Part Number | HK-S4-2HB-STDK |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Shocker 4 train horn kit |
| Horn Material | High-impact fiberglass reinforced ABS |
| Horn Measurements | № 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) |
| Air Tank | HornAir 2-gallon 6 port air tank |
| Tank Length | 17″ (431.8 mm) |
| Tank Diameter | 6″ (152.4 mm) |
| Tank Height | 7″ (177.8 mm) |
| Tank Weight | 10 lb (4.54 Kg) |
| Average Fill Time | 1 minute 10 seconds |
| Air Flow | 1.56 CFM |
| Compressor Length | 8.75" (222.25 mm) |
| Compressor Width | 4" (101.6 mm) |
| Compressor Height | 6.6" (167.64 mm) |
| System Max Amp Draw | 25 Amps |
| Assembled Length | 21" |
| Assembled Width | 23" |
| Assembled Height | 13" |
| Assembled Weight | 40 lbs |
| 2.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 150 PSI | 2 min. 50 sec. (± 10 sec.) |
| 110 to 150 PSI | 50 sec. (± 05 sec.) |
- HornBlasters Spare Tire Delete Instruction Manual
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
The horns come with a lifetime manufacturer’s defect warranty, and all other components carry a 2-year manufacturer’s defect warranty.
-
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
Select Horn Finish
From $308.00
Original: $879.99
-65%Open Box Conductor's Special 2HB Spare Tire Delete® Kit—
$879.99
$308.00More Images
Open Box Conductor's Special 2HB Spare Tire Delete® Kit
(Our Open-Box Products may have a few cosmetic defects but otherwise, they're in like-new working condition and still carry a Manufacturer’s Defect Warranty.)
BALLING ON A BUDGET? WE GOT YOU.
Behold the Conductor's Special 2HB Spare Tire Delete Kit - your wallet's new best friend in the world of affordable STD kits. This all-in-one set combines our notoriously loud Shocker XL horns, the STD bracket, and our HornAir 2HB onboard air system, delivering a sound that's larger than life, without shrinking your bank account.
-
The loudest horns we manufacture, be heard for miles!
- Super easy install with the Spare Tire Delete bracket
- Includes all necessary hardware & wiring
- 3-5 second honk time, 65-second recovery
Important Notes:
- VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.
-
Fits most full-size pickups.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- Adding the S6 extensions to your STDK will increase the width from 20" to 29". Please make sure you have the clearance before purchasing.
The video in the link below shows the installation process for our Spare Tire Delete kits!
CLICK HERE FOR SPARE TIRE DELETE INSTALLATION VIDEO
The video in the link below shows our Shocker XL Train Horn in a third-party decibel test alongside your typical "air horn" honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!
CLICK HERE FOR A CUSTOMER VIDEO REVIEW OF THESE HORNS
- Shocker XL train horns
- Spare tire delete bracket
- 2-gallon 6 port air tank
- AC-2 air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft of 5/16" D.O.T. approved air line
- 17ft of 1/2" D.O.T. approved air line
- 6ft of 3/8" air line (for air compressors air intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Black Widow 1/2" NPT stainless steel electric air valve
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
| Part Number | HK-S4-2HB-STDK |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Shocker 4 train horn kit |
| Horn Material | High-impact fiberglass reinforced ABS |
| Horn Measurements | № 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) |
| Air Tank | HornAir 2-gallon 6 port air tank |
| Tank Length | 17″ (431.8 mm) |
| Tank Diameter | 6″ (152.4 mm) |
| Tank Height | 7″ (177.8 mm) |
| Tank Weight | 10 lb (4.54 Kg) |
| Average Fill Time | 1 minute 10 seconds |
| Air Flow | 1.56 CFM |
| Compressor Length | 8.75" (222.25 mm) |
| Compressor Width | 4" (101.6 mm) |
| Compressor Height | 6.6" (167.64 mm) |
| System Max Amp Draw | 25 Amps |
| Assembled Length | 21" |
| Assembled Width | 23" |
| Assembled Height | 13" |
| Assembled Weight | 40 lbs |
| 2.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 150 PSI | 2 min. 50 sec. (± 10 sec.) |
| 110 to 150 PSI | 50 sec. (± 05 sec.) |
- HornBlasters Spare Tire Delete Instruction Manual
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
The horns come with a lifetime manufacturer’s defect warranty, and all other components carry a 2-year manufacturer’s defect warranty.
-
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
(Our Open-Box Products may have a few cosmetic defects but otherwise, they're in like-new working condition and still carry a Manufacturer’s Defect Warranty.)
BALLING ON A BUDGET? WE GOT YOU.
Behold the Conductor's Special 2HB Spare Tire Delete Kit - your wallet's new best friend in the world of affordable STD kits. This all-in-one set combines our notoriously loud Shocker XL horns, the STD bracket, and our HornAir 2HB onboard air system, delivering a sound that's larger than life, without shrinking your bank account.
-
The loudest horns we manufacture, be heard for miles!
- Super easy install with the Spare Tire Delete bracket
- Includes all necessary hardware & wiring
- 3-5 second honk time, 65-second recovery
Important Notes:
- VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.
-
Fits most full-size pickups.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- Adding the S6 extensions to your STDK will increase the width from 20" to 29". Please make sure you have the clearance before purchasing.
The video in the link below shows the installation process for our Spare Tire Delete kits!
CLICK HERE FOR SPARE TIRE DELETE INSTALLATION VIDEO
The video in the link below shows our Shocker XL Train Horn in a third-party decibel test alongside your typical "air horn" honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!
CLICK HERE FOR A CUSTOMER VIDEO REVIEW OF THESE HORNS
- Shocker XL train horns
- Spare tire delete bracket
- 2-gallon 6 port air tank
- AC-2 air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft of 5/16" D.O.T. approved air line
- 17ft of 1/2" D.O.T. approved air line
- 6ft of 3/8" air line (for air compressors air intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Black Widow 1/2" NPT stainless steel electric air valve
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
| Part Number | HK-S4-2HB-STDK |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Shocker 4 train horn kit |
| Horn Material | High-impact fiberglass reinforced ABS |
| Horn Measurements | № 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) |
| Air Tank | HornAir 2-gallon 6 port air tank |
| Tank Length | 17″ (431.8 mm) |
| Tank Diameter | 6″ (152.4 mm) |
| Tank Height | 7″ (177.8 mm) |
| Tank Weight | 10 lb (4.54 Kg) |
| Average Fill Time | 1 minute 10 seconds |
| Air Flow | 1.56 CFM |
| Compressor Length | 8.75" (222.25 mm) |
| Compressor Width | 4" (101.6 mm) |
| Compressor Height | 6.6" (167.64 mm) |
| System Max Amp Draw | 25 Amps |
| Assembled Length | 21" |
| Assembled Width | 23" |
| Assembled Height | 13" |
| Assembled Weight | 40 lbs |
| 2.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 150 PSI | 2 min. 50 sec. (± 10 sec.) |
| 110 to 150 PSI | 50 sec. (± 05 sec.) |
- HornBlasters Spare Tire Delete Instruction Manual
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
The horns come with a lifetime manufacturer’s defect warranty, and all other components carry a 2-year manufacturer’s defect warranty.
-
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
